Switching It Up

Parenting Instructor: Making a happy home isn’t like flipping on a light switch.
Cletus: Light switch??

 – The Simpsons

Originally, there weren’t a whole lot of light switches (or, indeed, electrical outlets) in this house. Most of the lights would have been on pullchains, and the switches are generally retrofitted. But our living room had a switch that was original in its entirety, from the wiring to the plate.

DSCF5679

Push button switches were standard in the 1920s, and this plate contained one that was still operating (for the porch light) and one that was jammed. (The light for the jammed switch had been removed and the live wires plastered over, but that’s a story for another time.)

Push button light switch on the wall (detail from an ad for ready-to-install woodwork)

Push button light switch on the wall (detail from an ad for ready-to-install woodwork)

When we rewired the porch and living room lights, I wanted to keep the brass plate for these switches and the outlet plate below it on the wall. I liked the patina, and given some of the stupid things that had been done to the house over the years, the fact that the plates were still there was a bit of a triumph.

But how to use a push-button switch plate in a post-push-button world? Well, there’s a whole reproduction-hardware economy built around first-world problems like these! We replaced the old push buttons with these from Classic Accents.

Classic Accents Push Button ReproductionThese don’t have quite the operational “CLUNK” of the original, but they look virtually identical — and hey, they’re UL-listed, so they turn the lights on and off safely. Bonus! I’ve also seen rebuilt originals (check ebay) and some non-UL-listed reproductions if you are shopping.

After we got that bit of wiring done, Kev said, “Hey, wouldn’t it be nice to make the other plates in here match the originals?” I said, “Are you taking the role of Stacey in the play today?” and started looking for brass switch and outlet plates. They are out there, but for more than I wanted to pay — plus, no patina. But at the salvage places, brass covers are about $4 a pop. They are often paint-coated, but pop ’em in the Crockpot, and it’s instant history time.

Before

Before

After

After. If super-shiny is your thing, these would buff up nicely as well.

When using vintage switch covers, you may need to change the switch itself. The hole for a regular switch is a tiny bit smaller than the current standard. Switches with the plastic box surrounding the switch are just a titch too big for the vintage plates.

15-Amp Single Pole Switch

What you want is the fatter switches that look bigger overall, but without the casing around them (which has nothing to do with function in any event).

15-Amp Single Pole Switch without casing

If you need to do it, changing switches is easy, but be careful and follow all safety precautions.

Old metal outlet covers will fit standard electrical receptacles with no trouble (and if needed, you can find double-gang covers with some patience). For either switch or outlet covers, if you don’t have brass flat-head screws, you can fake it by painting the screwheads on the standard fasteners you remove with the plastic plates.

These vintage covers are a quick, easy and cheap way to restore a bit of character to an old home. It’s one of the easiest restoration projects you can do — and with an old house, those easy projects don’t come along often!

Related Posts Plugin for WordPress, Blogger...
This entry was posted in Before & After, Decor, Electrical, Walls & Floors and tagged , , , , , , . Bookmark the permalink.

5 Responses to Switching It Up

Leave a Reply to Christine @ Little House On The Corner Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.